Square Joint Acacia Wood Deck Tiles, 6-Slat Interlocking Design for Indoor & Outdoor (Set of 27)
| Material | Acacia Wood |
| Size (inches) | 12.24″L x 12.24″W x 0.75″H |
| Weight (lbs) | 37.5 |
Package Info
Select Variant
Interlocking Deck Tiles — 6-Slat Acacia Wood 27-Piece Set for Balcony, Patio and Garden
The 6-Slat Acacia Deck Tile Set (27 pieces) offers a wider plank pattern compared to the 12-slat version, creating a more traditional hardwood deck appearance. Built from solid acacia wood, these interlocking deck tiles snap together using a tool-free system — no adhesive, no drilling, and no professional help required. Each tile measures 12″ x 12″, and the result is a warm, natural outdoor floor that can be installed in under an hour and removed just as easily.
Acacia Wood with Lasting Weather Resistance
Acacia is a naturally dense, oil-rich hardwood that holds up exceptionally well in outdoor environments. Its tight grain resists moisture absorption, warping, and UV damage far better than softer wood species. The surface finish on these tiles adds an extra layer of protection while enhancing the warm, natural tones of the wood grain — a look that improves with age rather than fading or peeling over time.
The 6-slat design features wider planks with fewer gaps, giving a cleaner, more traditional wood deck aesthetic. Water still drains efficiently between slats, and airflow beneath each tile prevents moisture from accumulating on the underside — key factors in maintaining the longevity of the flooring system.

The 6-slat pattern creates a wider, more traditional wood deck aesthetic.
You may also like
How the Interlocking Deck Tiles Install — No Tools, No Commitment
Each tile connects to adjacent tiles via built-in interlocking tabs on all four sides — simply press together until they click. No tools, no adhesive, no measuring required. The full 27-tile set covering approximately 27 square feet can typically be laid in under 30 minutes. Tiles can be trimmed to fit around obstacles such as posts, drain covers, or uneven edges.
Since the tiles are not permanently attached to the surface, they can be lifted and relocated whenever needed. This makes these interlocking deck tiles an excellent option for rental properties, apartment balconies, or any outdoor space where a permanent floor installation is not practical or permitted.

Tool-free installation on any flat outdoor surface — quick to lay, easy to remove.
Coverage and Expansion
The 27-tile set covers approximately 27 square feet — suitable for a small balcony, a patio seating area, or a garden walkway section. Multiple sets connect seamlessly, so expanding the covered area at a later stage is straightforward. Each tile uses the same interlocking system, making integration between sets smooth and consistent.
For best results, install on a flat, solid base such as concrete, existing tile, or compacted gravel. Minor surface imperfections are generally bridged by the tile system, but significantly uneven ground should be leveled before laying the tiles.

27 tiles, approximately 27 square feet — add more sets to cover larger areas.
Maintenance Tips
Sweep or rinse periodically to remove debris from between the slats. Apply an outdoor wood oil or decking treatment once or twice a year to maintain the finish and replenish the natural oils in the wood. Individual tiles can be replaced if damaged without needing to remove the entire floor — a practical advantage of the modular system.
Frequently Asked Questions About the Interlocking Deck Tiles
Can interlocking deck tiles be installed on grass or dirt?
They perform best on a flat, solid base such as concrete, pavers, or compacted gravel. Installing directly on soft grass or soil can cause tiles to sit unevenly; level and compact the ground first, or lay a gravel bed underneath.
Can the tiles stay outside through winter?
Yes. Acacia’s dense, oil-rich grain tolerates rain, snow, and temperature swings. For the longest service life, refresh the finish with outdoor wood oil once or twice a year, and ensure water can drain freely beneath the tiles.
How do I fit the tiles around posts or corners?
Individual tiles can be trimmed with a standard saw to fit around posts, drain covers, and irregular edges. Because each tile is modular, you only cut the pieces that meet the obstacle.
| Weight | 37.5 lbs |
|---|---|
| Dimensions | 12.24 × 12.24 × 0.75 in |
| Color | Black, Brown, Muted Green, Brown – Natural, Natural, White Oak |

















































Not bad, but the service does not meet my expectations.
I wish there were more customization possible. The support is okay.
A promising product, worth trying
Easy to handle